ALT Linux Bugzilla – Full Text Bug Listing
| Summary: | Мертвый завис при поднятии usb или eth. | ||
|---|---|---|---|
| Product: | Sisyphus | Reporter: | vasy <vasy> |
| Component: | kernel-image-std-up | Assignee: | Sergey Vlasov <vsu> |
| Status: | CLOSED FIXED | QA Contact: | qa-sisyphus |
| Severity: | critical | ||
| Priority: | P2 | CC: | rider |
| Version: | unstable | ||
| Hardware: | all | ||
| OS: | Linux | ||
| Bug Depends on: | |||
| Bug Blocks: | 3005 | ||
|
Description
vasy
2003-09-10 19:03:47 MSD
На какой версии ядра это происходит ? Какие параметры ядру передаются (cat /proc/cmdline)? kernel-image-std-up-2.4.22-alt2
image=/boot/vmlinuz-2.4.22-std-up-alt2
label=2422-std-up-2
root=/dev/hda6
read-write
optional
vga=788
append=" fbprogress=/dev/tty10"
initrd=/boot/initrd-2.4.22-std-up-alt2.img
Зависает ли поднятие сети или USB, если добавлять опции ядру: acpi=off nolapic noapic ? acpi=off - не зависает nolapic - зависает noapic - зависает все три опции - независает Сергей, есть идеи, как можно отключить инициализацию ACPI в ядре специально для VT82C586 ? 2vasy: если не трудно: cat /proc/interrupts при загруженом ядре и включенном ACPI и lspcidrake -v можно аттачами к этой ошибке. cat /proc/interrupts
CPU0
0: 15545 XT-PIC timer
1: 220 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
9: 0 XT-PIC acpi
10: 0 XT-PIC VIA686A
12: 3470 XT-PIC PS/2 Mouse
14: 12608 XT-PIC ide0
NMI: 0
LOC: 15505
ERR: 0
MIS: 0
vasy@vasy ~ $ sudo lspcidrake -v
unknown : VIA Technologies|VT8601 [BRIDGE_HOST] (vendor:1106
device:0601 subv:1043 subd:806e)
unknown : VIA Technologies|VT8601 [BRIDGE_PCI] (vendor:1106
device:8601)
unknown : VIA Technologies|VT82C686 [Apollo Super] [BRIDGE_ISA]
(vendor:1106 device:0686 subv:1043 subd:806e)
unknown : VIA Technologies|VT82C586 IDE [Apollo] [STORAGE_IDE]
(vendor:1106 device:0571)
usb-uhci : VIA Technologies|VT82C586B USB [SERIAL_USB] (vendor:1106
device:3038 subv:0925 subd:1234)
usb-uhci : VIA Technologies|VT82C586B USB [SERIAL_USB] (vendor:1106
device:3038 subv:0925 subd:1234)
unknown : VIA Technologies|VT82C686 [Apollo Super ACPI] [BRIDGE_HOST]
(vendor:1106 device:3057)
via82cxxx_audio : VIA Technologies|VT82C686 [Apollo Super AC97/Audio]
[MULTIMEDIA_AUDIO] (vendor:1106 device:3058 subv:1043 subd:8062)
8139too : Realtek|RTL-8139 [NETWORK_ETHERNET] (vendor:10ec
device:8139)
Card:Trident CyberBlade (generic): Trident Microsystems|CyberBlade/i1
[DISPLAY_VGA] (vendor:1023 device:8500 subv:1043 subd:806e)
unknown : Virtual|Hub [] (vendor:0000 device:0000)
unknown : Virtual|Hub [] (vendor:0000 device:0000)
Ещё, пожалуйста, покажите полный вывод dmesg при загрузке с включенным ACPI (прежде всего интересует начальная часть инициализации ACPI - перед "ACPI: BIOS passes blacklist"). Вероятно, эту плату/BIOS придётся добавить в blacklist, а для этого нужна идентификационная информация. Да, кстати, а версия BIOS свежая? В некоторых случаях неработоспособность ACPI может исправляться обновлением BIOS (если в новой версии исправлены ошибки в DSDT). Что за материнская плата? Обновление БИОС помогло. Плата ASUS CUPLE-VM Старая версия биос: cup1003, новая: cup1004 dmesg с новой версией биос vasy@vasy ~ $ dmesg Linux version 2.4.22-std-up-alt2 (builder@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt3)) #1 Tue Sep 9 16:10:40 MSD 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f7fc000 (usable) BIOS-e820: 000000000f7fc000 - 000000000f7ff000 (ACPI data) BIOS-e820: 000000000f7ff000 - 000000000f800000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 247MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 63484 zone(0): 4096 pages. zone(1): 59388 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6e00 ACPI: RSDT (v001 ASUS CUPLE_VM 0x30303031 MSFT 0x31313031) @ 0x0f7fc000 ACPI: FADT (v001 ASUS CUPLE_VM 0x30303031 MSFT 0x31313031) @ 0x0f7fc080 ACPI: BOOT (v001 ASUS CUPLE_VM 0x30303031 MSFT 0x31313031) @ 0x0f7fc040 ACPI: DSDT (v001 ASUS CUPLE_VM 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: MADT not present Kernel command line: BOOT_IMAGE=2422-std-up-2-crash rw root=306 fbprogress=/dev/tty10 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 902.074 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1795.68 BogoMIPS Memory: 248580k/253936k available (1175k kernel code, 4968k reserved, 488k data, 128k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Celeron (Coppermine) stepping 0a Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 902.0943 MHz. ..... host bus clock speed is 100.2326 MHz. cpu: 0, clocks: 1002326, slice: 501163 CPU0<T0:1002320,T1:501152,D:5,S:501163,C:1002326> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030813 PCI: PCI BIOS revision 2.10 entry at 0xf0da0, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' PCI: Disabling Via external APIC routing PCI: Via IRQ fixup for 00:04.2, from 11 to 9 PCI: Via IRQ fixup for 00:04.3, from 11 to 9 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xf7000000, mapped to 0xd000a000, size 1875k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: protected mode interface info at c000:66cc vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 15525 bytes, v2). Console: switching to colour frame buffer device 82x26 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:04.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG SV1021H, ATA DISK drive hdb: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive blk: queue c02edb80, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-disk driver. hda: host protected area => 1 hda: 19932192 sectors (10205 MB) w/426KiB Cache, CHS=1240/255/63, UDMA(100) Partition check: hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 148k freed VFS: Mounted root (romfs filesystem) readonly. reiserfs: found format "3.5" with standard journal reiserfs: checking transaction log (device ide0(3,6)) ... for (ide0(3,6)) ide0(3,6):Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem). Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 128k freed Real Time Clock Driver v1.10e Adding Swap: 128452k swap-space (priority -1) i2c-core.o: i2c core module version 2.8.0 (20030714) i2c-viapro.o version 2.8.0 (20030714) i2c-proc.o version 2.8.0 (20030714) via686a.o version 2.8.0 (20030714) i2c-isa.o version 2.8.0 (20030714) reiserfs: found format "3.5" with standard journal reiserfs: checking transaction log (device ide0(3,9)) ... for (ide0(3,9)) ide0(3,9):Using r5 hash to sort names reiserfs: found format "3.5" with standard journal reiserfs: checking transaction log (device ide0(3,7)) ... for (ide0(3,7)) ide0(3,7):Using r5 hash to sort names reiserfs: found format "3.5" with standard journal reiserfs: checking transaction log (device ide0(3,8)) ... for (ide0(3,8)) ide0(3,8):Using r5 hash to sort names reiserfs: found format "3.5" with standard journal reiserfs: checking transaction log (device ide0(3,10)) ... for (ide0(3,10)) ide0(3,10):Using r5 hash to sort names usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 16:21:28 Sep 9 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver 8139too Fast Ethernet driver 0.9.26 divert: allocating divert_blk for eth0 eth0: RealTek RTL8139 Fast Ethernet at 0xd06b9000, 00:e0:4c:00:20:5e, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting half-duplex based on auto-negotiated partner ability 0000. PCI: Setting latency timer of device 00:04.5 to 64 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: overridden by ACPI. parport_pc: irq specified without base address. Use 'io=' to specify one parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport_pc: Via 686A parallel port: io=0x378 lp0: using parport0 (polling). Looking for splash picture.... found (800x600, 15525 bytes, v2). Splash status on console 0 changed to on Вывод dmesg нужен от _старой_ версии BIOS. Посмотрите в логах (/var/log/syslog/messages*) - возможно, где-то осталась эта информация. Да я подумал, что со строй версии надо, но уже после перепрошивки :((( Вот из логов, вроде оно: Sep 10 17:25:22 vasy kernel: Linux version 2.4.22-std-up-alt2 (builder@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux , build 2.96-alt3)) #1 Tue Sep 9 16:10:40 MSD 2003 Sep 10 17:25:22 vasy kernel: BIOS-provided physical RAM map: Sep 10 17:25:22 vasy kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Sep 10 17:25:22 vasy kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Sep 10 17:25:22 vasy kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 10 17:25:22 vasy kernel: BIOS-e820: 0000000000100000 - 000000000f7fc000 (usable) Sep 10 17:25:22 vasy kernel: BIOS-e820: 000000000f7fc000 - 000000000f7ff000 (ACPI data) Sep 10 17:25:22 vasy kernel: BIOS-e820: 000000000f7ff000 - 000000000f800000 (ACPI NVS) Sep 10 17:25:22 vasy kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 10 17:25:22 vasy kernel: 247MB LOWMEM available. Sep 10 17:25:22 vasy kernel: On node 0 totalpages: 63484 Sep 10 17:25:22 vasy kernel: zone(0): 4096 pages. Sep 10 17:25:22 vasy kernel: zone(1): 59388 pages. Sep 10 17:25:22 vasy kernel: zone(2): 0 pages. Sep 10 17:25:22 vasy kernel: ACPI: RSDP (v000 ASUS ) @ 0x000f6990 Sep 10 17:25:22 vasy kernel: ACPI: RSDT (v001 ASUS CUPLE_VM 0x30303031 MSFT 0x31313031) @ 0x0f7fc000 Sep 10 17:25:22 vasy kernel: ACPI: FADT (v001 ASUS CUPLE_VM 0x30303031 MSFT 0x31313031) @ 0x0f7fc080 Sep 10 17:25:22 vasy kernel: ACPI: BOOT (v001 ASUS CUPLE_VM 0x30303031 MSFT 0x31313031) @ 0x0f7fc040 Sep 10 17:25:22 vasy kernel: ACPI: DSDT (v001 ASUS CUPLE_VM 0x00001000 MSFT 0x0100000b) @ 0x00000000 Sep 10 17:25:22 vasy kernel: ACPI: MADT not present Sep 10 17:25:22 vasy kernel: Kernel command line: BOOT_IMAGE=2422-std-up-2 rw root=306 fbprogress=/dev/tty10 Sep 10 17:25:22 vasy kernel: Local APIC disabled by BIOS -- reenabling. Sep 10 17:25:22 vasy kernel: Found and enabled local APIC! Sep 10 17:25:22 vasy kernel: Initializing CPU#0 Sep 10 17:25:22 vasy kernel: Detected 902.074 MHz processor. Sep 10 17:25:22 vasy kernel: Console: colour dummy device 80x25 Sep 10 17:25:22 vasy kernel: Calibrating delay loop... 1795.68 BogoMIPS Sep 10 17:25:22 vasy kernel: Memory: 248596k/253936k available (1175k kernel code, 4952k reserved, 488k data, 128k init, 0k highmem) Sep 10 17:25:22 vasy kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Sep 10 17:25:22 vasy kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Sep 10 17:25:22 vasy kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) Sep 10 17:25:22 vasy kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Sep 10 17:25:22 vasy kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 10 17:25:22 vasy kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Sep 10 17:25:22 vasy kernel: CPU: L2 cache: 128K Sep 10 17:25:22 vasy kernel: Intel machine check architecture supported. Sep 10 17:25:22 vasy kernel: Intel machine check reporting enabled on CPU#0. Sep 10 17:25:22 vasy kernel: CPU: Intel Celeron (Coppermine) stepping 0a Sep 10 17:25:22 vasy kernel: Enabling fast FPU save and restore... done. Sep 10 17:25:22 vasy kernel: Enabling unmasked SIMD FPU exception support... done. Sep 10 17:25:22 vasy kernel: Checking 'hlt' instruction... OK. Sep 10 17:25:22 vasy kernel: POSIX conformance testing by UNIFIX Sep 10 17:25:22 vasy kernel: enabled ExtINT on CPU#0 Sep 10 17:25:22 vasy kernel: ESR value before enabling vector: 00000000 Sep 10 17:25:22 vasy kernel: ESR value after enabling vector: 00000000 Sep 10 17:25:22 vasy kernel: Using local APIC timer interrupts. Sep 10 17:25:22 vasy kernel: calibrating APIC timer ... Sep 10 17:25:22 vasy kernel: ..... CPU clock speed is 902.0943 MHz. Sep 10 17:25:22 vasy kernel: ..... host bus clock speed is 100.2326 MHz. Sep 10 17:25:22 vasy kernel: cpu: 0, clocks: 1002326, slice: 501163 Sep 10 17:25:22 vasy kernel: CPU0<T0:1002320,T1:501152,D:5,S:501163,C:1002326> Sep 10 17:25:22 vasy kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Sep 10 17:25:22 vasy kernel: mtrr: detected mtrr type: Intel Sep 10 17:25:22 vasy kernel: ACPI: Subsystem revision 20030813 Sep 10 17:25:22 vasy kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0d20, last bus=1 Sep 10 17:25:22 vasy kernel: PCI: Using configuration type 1 Sep 10 17:25:22 vasy kernel: ACPI: Interpreter enabled Sep 10 17:25:22 vasy kernel: ACPI: Using PIC for interrupt routing Sep 10 17:25:22 vasy kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5) Sep 10 17:25:22 vasy kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 10 17:25:22 vasy kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 17:25:22 vasy kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 17:25:22 vasy kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) Sep 10 17:25:22 vasy kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Sep 10 17:25:22 vasy kernel: PCI: Probing PCI hardware (bus 00) Sep 10 17:25:22 vasy kernel: PCI: Probing PCI hardware Sep 10 17:25:22 vasy kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 Sep 10 17:25:22 vasy kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 Sep 10 17:25:22 vasy kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 Sep 10 17:25:22 vasy kernel: PCI: Using ACPI for IRQ routing Sep 10 17:25:22 vasy kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Sep 10 17:25:22 vasy kernel: PCI: Disabling Via external APIC routing Sep 10 17:25:22 vasy kernel: PCI: Via IRQ fixup for 00:04.2, from 11 to 5 Sep 10 17:25:22 vasy kernel: PCI: Via IRQ fixup for 00:04.3, from 11 to 5 Sep 10 17:25:22 vasy kernel: Linux NET4.0 for Linux 2.4 Sep 10 17:25:22 vasy kernel: Based upon Swansea University Computer Society NET3.039 Sep 10 17:25:22 vasy kernel: Initializing RT netlink socket Sep 10 17:25:22 vasy kernel: Starting kswapd Sep 10 17:25:22 vasy kernel: VFS: Disk quotas vdquot_6.5.1 Sep 10 17:25:22 vasy kernel: vesafb: framebuffer at 0xf7000000, mapped to 0xd000a000, size 1875k Sep 10 17:25:22 vasy kernel: vesafb: mode is 800x600x16, linelength=1600, pages=7 Sep 10 17:25:22 vasy kernel: vesafb: protected mode interface info at c000:66cc Sep 10 17:25:22 vasy kernel: vesafb: scrolling: redraw Sep 10 17:25:22 vasy kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Sep 10 17:25:22 vasy kernel: Looking for splash picture... no good signature found. Sep 10 17:25:22 vasy kernel: Console: switching to colour frame buffer device 100x37 Sep 10 17:25:22 vasy kernel: fb0: VESA VGA frame buffer device Sep 10 17:25:22 vasy kernel: pty: 256 Unix98 ptys configured Sep 10 17:25:22 vasy kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled Sep 10 17:25:22 vasy kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Sep 10 17:25:22 vasy kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Sep 10 17:25:22 vasy kernel: NET4: Frame Diverter 0.46 Sep 10 17:25:22 vasy kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Sep 10 17:25:22 vasy kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 Sep 10 17:25:22 vasy kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 10 17:25:22 vasy kernel: VP_IDE: IDE controller at PCI slot 00:04.1 Sep 10 17:25:22 vasy kernel: VP_IDE: chipset revision 6 Sep 10 17:25:22 vasy kernel: VP_IDE: not 100%% native mode: will probe irqs later Sep 10 17:25:22 vasy kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 10 17:25:22 vasy kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1 Sep 10 17:25:22 vasy kernel: ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA Sep 10 17:25:22 vasy kernel: ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio Sep 10 17:25:22 vasy kernel: hda: SAMSUNG SV1021H, ATA DISK drive Sep 10 17:25:22 vasy kernel: hdb: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive Sep 10 17:25:22 vasy kernel: blk: queue c02edb80, I/O limit 4095Mb (mask 0xffffffff) Sep 10 17:25:22 vasy kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 10 17:25:22 vasy kernel: hda: attached ide-disk driver. Sep 10 17:25:22 vasy kernel: hda: host protected area => 1 Sep 10 17:25:22 vasy kernel: hda: 19932192 sectors (10205 MB) w/426KiB Cache, CHS=1240/255/63, UDMA(100) Sep 10 17:25:22 vasy kernel: Partition check: Sep 10 17:25:22 vasy kernel: hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 > Sep 10 17:25:22 vasy kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Sep 10 17:25:22 vasy kernel: md: Autodetecting RAID arrays. Sep 10 17:25:22 vasy kernel: md: autorun ... Sep 10 17:25:22 vasy kernel: md: ... autorun DONE. Sep 10 17:25:22 vasy kernel: Initializing Cryptographic API Sep 10 17:25:22 vasy kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Sep 10 17:25:22 vasy kernel: IP Protocols: ICMP, UDP, TCP Sep 10 17:25:22 vasy kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes Sep 10 17:25:22 vasy kernel: TCP: Hash tables configured (established 16384 bind 32768) Sep 10 17:25:22 vasy kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Sep 10 17:25:22 vasy kernel: RAMDISK: Compressed image found at block 0 Sep 10 17:25:22 vasy kernel: Freeing initrd memory: 132k freed Sep 10 17:25:22 vasy kernel: VFS: Mounted root (romfs filesystem) readonly. Sep 10 17:25:22 vasy kernel: reiserfs: found format "3.5" with standard journal Sep 10 17:25:22 vasy kernel: reiserfs: checking transaction log (device ide0(3,6)) ... Sep 10 17:25:22 vasy kernel: for (ide0(3,6)) Sep 10 17:25:22 vasy kernel: reiserfs: replayed 9 transactions in 2 seconds Sep 10 17:25:22 vasy kernel: ide0(3,6):Using r5 hash to sort names Sep 10 17:25:22 vasy kernel: VFS: Mounted root (reiserfs filesystem). Sep 10 17:25:22 vasy kernel: Trying to move old root to /initrd ... failed Sep 10 17:25:22 vasy kernel: Unmounting old root Sep 10 17:25:22 vasy kernel: Trying to free ramdisk memory ... okay Sep 10 17:25:22 vasy kernel: Freeing unused kernel memory: 128k freed Sep 10 17:25:22 vasy kernel: Real Time Clock Driver v1.10e Sep 10 17:25:22 vasy kernel: Adding Swap: 128452k swap-space (priority -1) Sep 10 17:25:22 vasy kernel: i2c-core.o: i2c core module version 2.8.0 (20030714) Sep 10 17:25:22 vasy kernel: i2c-viapro.o version 2.8.0 (20030714) Sep 10 17:25:22 vasy kernel: i2c-proc.o version 2.8.0 (20030714) Sep 10 17:25:22 vasy kernel: via686a.o version 2.8.0 (20030714) Sep 10 17:25:22 vasy kernel: i2c-isa.o version 2.8.0 (20030714) Sep 10 17:25:22 vasy kernel: reiserfs: found format "3.5" with standard journal Sep 10 17:25:22 vasy kernel: reiserfs: checking transaction log (device ide0(3,9)) ... Sep 10 17:25:22 vasy kernel: for (ide0(3,9)) Sep 10 17:25:22 vasy kernel: ide0(3,9):Using r5 hash to sort names Sep 10 17:25:22 vasy kernel: reiserfs: found format "3.5" with standard journal Sep 10 17:25:22 vasy kernel: reiserfs: checking transaction log (device ide0(3,7)) ... Sep 10 17:25:22 vasy kernel: for (ide0(3,7)) Sep 10 17:25:22 vasy kernel: reiserfs: replayed 1 transactions in 0 seconds Sep 10 17:25:22 vasy kernel: ide0(3,7):Using r5 hash to sort names Sep 10 17:25:22 vasy kernel: reiserfs: found format "3.5" with standard journal Sep 10 17:25:22 vasy kernel: reiserfs: checking transaction log (device ide0(3,8)) ... Sep 10 17:25:22 vasy kernel: for (ide0(3,8)) Sep 10 17:25:22 vasy kernel: reiserfs: replayed 2 transactions in 0 seconds Sep 10 17:25:22 vasy kernel: ide0(3,8):Using r5 hash to sort names Sep 10 17:25:22 vasy kernel: reiserfs: found format "3.5" with standard journal Sep 10 17:25:22 vasy kernel: reiserfs: checking transaction log (device ide0(3,10)) ... Sep 10 17:25:22 vasy kernel: for (ide0(3,10)) Sep 10 17:25:22 vasy kernel: reiserfs: replayed 2 transactions in 0 seconds Sep 10 17:25:22 vasy kernel: ide0(3,10):Using r5 hash to sort names Мда, а блэклистить-то нечего - в новой версии BIOS не поменяли oem_revision в таблицах ACPI. А информацию DMI это ядро не выдаёт (а надо бы...). У вас есть возможность загрузить какое-нибудь ядро 2.4.20-alt* (например, то, которое идёт с Master/Junior 2.2)? От него нужен опять-таки вывод dmesg - информация такого вида: DMI 2.3 present. 31 structures occupying 1044 bytes. DMI table at 0x000F05F0. BIOS Vendor: American Megatrends Inc. BIOS Version: 62710 BIOS Release: 12/24/2001 System Vendor: Product Name: Version: 00000000 Serial Number: 00000000 Board Vendor: Gigabyte Technology Co., Ltd. Board Name: 7ZXE Board Version: 1.x Kernel command line: root=/dev/hda6 Т.е. начиная с "DMI x.x present" и до "Kernel command line". Если сохранились старые логи, попробуйте выкопать из них аналогичную информацию для старой версии BIOS. Это из логов: Sep 11 11:42:52 vasy kernel: DMI 2.3 present. Sep 11 11:42:52 vasy kernel: 37 structures occupying 1126 bytes. Sep 11 11:42:52 vasy kernel: DMI table at 0x000F29B0. Sep 11 11:42:52 vasy kernel: BIOS Vendor: Award Software, Inc. Sep 11 11:42:52 vasy kernel: BIOS Version: ASUS CUPLE-VM ACPI BIOS Revision 1003 Sep 11 11:42:52 vasy kernel: BIOS Release: 08/21/2001 Sep 11 11:42:52 vasy kernel: System Vendor: System Manufacturer Sep 11 11:42:52 vasy kernel: Product Name: System Name Sep 11 11:42:52 vasy kernel: Version: System Version Sep 11 11:42:52 vasy kernel: Serial Number: SYS-1234567890 Sep 11 11:42:52 vasy kernel: Board Vendor: ASUSTeK Computer INC. Sep 11 11:42:52 vasy kernel: Board Name: CUPLE-VM Sep 11 11:42:52 vasy kernel: Board Version: REV 1.xx Sep 11 11:42:52 vasy kernel: Kernel command line: BOOT_IMAGE=2420-alt5-up rw roo t=306 fbprogress=/dev/tty10 это свежее: DMI 2.3 present. 37 structures occupying 1126 bytes. DMI table at 0x000F2A40. BIOS Vendor: Award Software, Inc. BIOS Version: ASUS CUPLE-VM ACPI BIOS Revision 1004 BIOS Release: 06/17/2002 System Vendor: System Manufacturer Product Name: System Name Version: System Version Serial Number: SYS-1234567890 Board Vendor: ASUSTeK Computer INC. Board Name: CUPLE-VM Board Version: REV 1.xx Kernel command line: BOOT_IMAGE=2420-alt5-up rw root=306 fbprogress=/dev/tty10 просьба проверить на 2.4.22-alt4 Работает. Но и alt2 работало после обновления биоса. тогда закройте баг (старую версию BIOS я добавил в blacklist, чтобы на неё больше не наступали). |
