Attachment 3104 Details for Bug 18044 – dmesg after plugging

dmesg after plugging

dmesg (text/plain), 29.96 KB, created by Evgenii Terechkov on 2008-11-30 00:49:22 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Evgenii Terechkov

Created: 2008-11-30 00:49:22 MSK

Size: 29.96 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-std-def-alt3 (builder@apiary.armor.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt6) (GCC) ) #1 SMP Tue Nov 25 17:05:26 UTC 2008
>PAT WC disabled due to known CPU erratum.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000ffeb000 (usable)
> BIOS-e820: 000000000ffeb000 - 000000000ffef000 (ACPI data)
> BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
> BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>last_pfn = 0xffeb max_arch_pfn = 0x100000
>kernel direct mapping tables up to ffeb000 @ 7000-d000
>RAMDISK: 0ff43000 - 0ffda4d7
>ACPI: RSDP 000F7B40, 0014 (r0 ASUS  )
>ACPI: RSDT 0FFEB000, 0030 (r1 ASUS   TUSL2-C  30303031 MSFT 31313031)
>ACPI: FACP 0FFEB100, 0074 (r1 ASUS   TUSL2-C  30303031 MSFT 31313031)
>ACPI: DSDT 0FFEB180, 3A5C (r1   ASUS TUSL2-C      1000 MSFT  100000B)
>ACPI: FACS 0FFFF000, 0040
>ACPI: BOOT 0FFEB040, 0028 (r1 ASUS   TUSL2-C  30303031 MSFT 31313031)
>ACPI: APIC 0FFEB080, 005A (r1 ASUS   TUSL2-C  30303031 MSFT 31313031)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>  mapped low ram: 0 - 0ffeb000
>  low ram: 00000000 - 0ffeb000
>  bootmap 00002000 - 00004000
>(9 early reservations) ==> bootmem [0000000000 - 000ffeb000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000200000 - 00006bd2c0]    TEXT DATA BSS ==> [0000200000 - 00006bd2c0]
>  #4 [000ff43000 - 000ffda4d7]          RAMDISK ==> [000ff43000 - 000ffda4d7]
>  #5 [00006be000 - 00006c1000]    INIT_PG_TABLE ==> [00006be000 - 00006c1000]
>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
>  #8 [0000002000 - 0000004000]          BOOTMAP ==> [0000002000 - 0000004000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x0000ffeb
>  HighMem  0x0000ffeb -> 0x0000ffeb
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0000ffeb
>On node 0 totalpages: 65418
>free_area_init_node: node 0, pgdat c058a380, node_mem_map c1000000
>  DMA zone: 3963 pages, LIFO batch:0
>  Normal zone: 60879 pages, LIFO batch:15
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
>PERCPU: Allocating 38428 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64842
>Kernel command line: root=LABEL=NEWROOT vga=788
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>TSC: Unable to calibrate against PIT
>TSC: using PMTIMER reference calibration
>Detected 1005.024 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 253520k/262060k available (2495k kernel code, 8064k reserved, 1215k data, 404k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
>    lowmem  : 0xc0000000 - 0xcffeb000   ( 255 MB)
>      .init : 0xc05a7000 - 0xc060c000   ( 404 kB)
>      .data : 0xc046fea0 - 0xc059fd40   (1215 kB)
>      .text : 0xc0200000 - 0xc046fea0   (2495 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2010.04 BogoMIPS (lpj=4020096)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 18k freed
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel Pentium III (Coppermine) stepping 0a
>APIC calibration not consistent with PM Timer: 87ms instead of 100ms
>APIC delta adjusted to PM-Timer: 837517 (731228)
>Brought up 1 CPUs
>Total of 1 processors activated (2010.04 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0 level CPU
>  groups: 0
>net_namespace: 840 bytes
>NET: Registered protocol family 16
>EISA bus registered
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0e30, last bus=2
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: 0000:00:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
>pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
>PCI: 0000:00:1f.1 reg 20 io port: [a800, a80f]
>PCI: 0000:00:1f.2 reg 20 io port: [a400, a41f]
>PCI: 0000:00:1f.3 reg 20 io port: [e800, e80f]
>PCI: 0000:00:1f.4 reg 20 io port: [a000, a01f]
>PCI: 0000:01:00.0 reg 10 32bit mmio: [f4000000, f4ffffff]
>PCI: 0000:01:00.0 reg 14 32bit mmio: [f6000000, f7ffffff]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [f5ff0000, f5ffffff]
>PCI: bridge 0000:00:01.0 32bit mmio: [f4000000, f5dfffff]
>PCI: bridge 0000:00:01.0 32bit mmio pref: [f5f00000, f7ffffff]
>PCI: 0000:02:0a.0 reg 10 io port: [d800, d8ff]
>PCI: 0000:02:0a.0 reg 14 32bit mmio: [f3800000, f38000ff]
>pci 0000:02:0a.0: supports D1
>pci 0000:02:0a.0: supports D2
>pci 0000:02:0a.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:0a.0: PME# disabled
>PCI: 0000:02:0c.0 reg 10 io port: [d400, d41f]
>pci 0000:02:0c.0: supports D1
>pci 0000:02:0c.0: supports D2
>PCI: 0000:02:0c.1 reg 10 io port: [d000, d007]
>pci 0000:02:0c.1: supports D1
>pci 0000:02:0c.1: supports D2
>PCI: 0000:02:0d.0 reg 10 io port: [b800, b8ff]
>PCI: 0000:02:0d.0 reg 14 32bit mmio: [f3000000, f30000ff]
>pci 0000:02:0d.0: supports D1
>pci 0000:02:0d.0: supports D2
>pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:0d.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 io port: [b000, dfff]
>PCI: bridge 0000:00:1e.0 32bit mmio: [f3000000, f3ffffff]
>PCI: bridge 0000:00:1e.0 32bit mmio pref: [f5e00000, f5efffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0xfffffff could not be reserved
>system 00:00: iomem range 0xffb80000-0xffbfffff has been reserved
>system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
>system 00:02: ioport range 0x3f0-0x3f1 has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:03: ioport range 0xe400-0xe47f has been reserved
>system 00:03: ioport range 0xec00-0xec3f has been reserved
>PM-Timer running at invalid rate: 87% of normal - aborting.
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: 0xf4000000-0xf5dfffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000f5f00000-0x000000f7ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0xb000-0xdfff
>pci 0000:00:1e.0:   MEM window: 0xf3000000-0xf3ffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000f5e00000-0x000000f5efffff
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 mmio: [0, 0]
>bus: 01 index 1 mmio: [f4000000, f5dfffff]
>bus: 01 index 2 mmio: [f5f00000, f7ffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [b000, dfff]
>bus: 02 index 1 mmio: [f3000000, f3ffffff]
>bus: 02 index 2 mmio: [f5e00000, f5efffff]
>bus: 02 index 3 io port: [0, ffff]
>bus: 02 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 605k freed
>Simple Boot Flag at 0x3a set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1228012018.404:1): initialized
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 496
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>vesafb: framebuffer at 0xf6000000, mapped to 0xd0880000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=3
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>EISA: Probing bus 0 at eisa.0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP bic registered
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 404k freed
>Write protecting the kernel text: 2496k
>Write protecting the kernel read-only data: 1020k
>Executing init=/init
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x244b rev 0x02)
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xa800-0xa807
>    ide1: BM-DMA at 0xa808-0xa80f
>Probing IDE interface ide0...
>hda: probing with STATUS(0x50) instead of ALTSTATUS(0x00)
>hda: WDC WD3200AAKB-00WHA0, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>hdc: SAMSUNG SP1203N, ATA DISK drive
>hdd: TEAC DW-552G, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/100 mode selected
>hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdd: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: Host Protected Area detected.
>	current capacity is 625142448 sectors (320072 MB)
>	native  capacity is 73575730178736 sectors (37670773851 MB)
>hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
>hda: task_no_data_intr: error=0x04 { DriveStatusError }
>ide: failed opcode was: 0x37
>hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 <<6>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide_generic: I/O resource 0x1F0-0x1F7 not free.
>ide_generic: I/O resource 0x170-0x177 not free.
> hda5 hda6 >
>hdc: max request size: 512KiB
>hdc: Host Protected Area detected.
>	current capacity is 234490943 sectors (120059 MB)
>	native  capacity is 234493056 sectors (120060 MB)
>hdc: Host Protected Area disabled.
>hdc: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63
>hdc: cache flushes supported
> hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 >
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>No dock devices found.
>libata version 3.00 loaded.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button (CM) [PWRB]
>fuse init (API version 7.9)
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel i815 Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
>ACPI: Invalid PBLK length [5]
>processor ACPI0007:00: registered as cooling_device0
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>8139too Fast Ethernet driver 0.9.28
>8139too 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>eth0: RealTek RTL8139 at 0xd087e000, 00:11:95:5c:b3:57, IRQ 22
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>gameport: EMU10K1 is pci0000:02:0c.1/gameport0, io 0xd000, speed 1125kHz
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>via-rhine 0000:02:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>eth1: VIA Rhine III at 0x1b800, 00:13:46:ec:f8:87, IRQ 21.
>eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
>hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ACPI: I/O resource 0000:00:1f.3 [0xe800-0xe80f] conflicts with ACPI region SM00 [0xe800-0xe806]
>ACPI: Device needs an ACPI driver
>Error: Driver 'pcspkr' is already registered, aborting...
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1f.2: setting latency timer to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000a400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-std-def-alt3 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1f.2
>uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1f.4: setting latency timer to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000a000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-std-def-alt3 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1f.4
>EMU10K1_Audigy 0000:02:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
>usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 1-1: Product: BT2.0
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=1241, idProduct=1603
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB Keyboard
>usb 2-1: Manufacturer:  
>ppdev: user-space parallel port driver
>Bluetooth: Core ver 2.13
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.3
>usbcore: registered new interface driver btusb
>usbcore: registered new interface driver hiddev
>input:   USB Keyboard as /devices/pci0000:00/0000:00:1f.4/usb2/2-1/2-1:1.0/input/input5
>input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1f.4-1
>input:   USB Keyboard as /devices/pci0000:00/0000:00:1f.4/usb2/2-1/2-1:1.1/input/input6
>input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1f.4-1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Adding 522072k swap on /dev/hda1.  Priority:-1 extents:1 across:522072k
>EXT3 FS on hda2, internal journal
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ReiserFS: hda5: found reiserfs format "3.6" with standard journal
>ReiserFS: hda5: using ordered data mode
>ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda5: checking transaction log (hda5)
>ReiserFS: hda5: Using r5 hash to sort names
>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem hda6
>Ending clean XFS mount for filesystem: hda6
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ori: link up, 100Mbps, full-duplex, lpa 0x41E1
>tech: link up, 100Mbps, full-duplex, lpa 0x45E1
>PPP generic driver version 2.4.2
>padlock: VIA PadLock Hash Engine not detected.
>PPP MPPE Compression module registered
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=0421, idProduct=043e
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: Nokia 6270
>usb 1-2: Manufacturer: Nokia
>usb 1-2: SerialNumber: 357576002050589
>usbcore: registered new interface driver libusual
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>scsi 0:0:0:0: Direct-Access     Nokia    Nokia 6270       0000 PQ: 0 ANSI: 4
>sd 0:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB)
>sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB)
>sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
>sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI removable disk
>usb-storage: device scan complete
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>usb 1-2: USB disconnect, address 3
>usb 1-2: new full speed USB device using uhci_hcd and address 4
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: can't set config #1, error -84
>usb 1-2: New USB device found, idVendor=0421, idProduct=043d
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: Nokia 6270
>usb 1-2: Manufacturer: Nokia
>usb 1-2: USB disconnect, address 4
>usb 1-2: new full speed USB device using uhci_hcd and address 5
>usb 1-2: device descriptor read/64, error -71
>hub 1-0:1.0: unable to enumerate USB device on port 2
>subfs 0.9
>usb 1-2: new full speed USB device using uhci_hcd and address 6
>usb 1-2: configuration #1 chosen from 1 choice
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb 1-2: New USB device found, idVendor=0421, idProduct=043e
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: Nokia 6270
>usb 1-2: Manufacturer: Nokia
>usb 1-2: SerialNumber: 357576002050589
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>scsi 1:0:0:0: Direct-Access     Nokia    Nokia 6270       0000 PQ: 0 ANSI: 4
>sd 1:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB)
>sd 1:0:0:0: [sda] Test WP failed, assume Write Enabled
>sd 1:0:0:0: [sda] Assuming drive cache: write through
>sd 1:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB)
>sd 1:0:0:0: [sda] Test WP failed, assume Write Enabled
>sd 1:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 1:0:0:0: [sda] Attached SCSI removable disk
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>usb-storage: device scan complete
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>usb 1-2: USB disconnect, address 6
>usb 1-2: new full speed USB device using uhci_hcd and address 7
>usb 1-2: unable to read config index 0 descriptor/all
>usb 1-2: can't read configurations, error -71
>usb 1-2: new full speed USB device using uhci_hcd and address 8
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb 1-2: new full speed USB device using uhci_hcd and address 9
>usb 1-2: configuration #1 chosen from 1 choice
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb 1-2: New USB device found, idVendor=1307, idProduct=0163
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: USB Flash Drive
>usb 1-2: Manufacturer: USB 2.0
>usb 1-2: SerialNumber: 9915d546e42199
>usb-storage: device found at 9
>usb-storage: waiting for device to settle before scanning
>scsi 2:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  0.00 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sda] 7897087 512-byte hardware sectors (4043 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
>sd 2:0:0:0: [sda] Assuming drive cache: write through
>sd 2:0:0:0: [sda] 7897087 512-byte hardware sectors (4043 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
>sd 2:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 2:0:0:0: [sda] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>usb-storage: device scan complete
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>UDP: short packet: From 169.130.116.42:63331 25649/289 to 94.73.192.77:46880
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>usb 1-2: USB disconnect, address 9
>usb 1-2: new full speed USB device using uhci_hcd and address 10
>usb 1-2: configuration #1 chosen from 1 choice
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb 1-2: New USB device found, idVendor=0421, idProduct=043e
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: Nokia 6270
>usb 1-2: Manufacturer: Nokia
>usb 1-2: SerialNumber: 357576002050589
>usb-storage: device found at 10
>usb-storage: waiting for device to settle before scanning
>scsi 3:0:0:0: Direct-Access     Nokia    Nokia 6270       0000 PQ: 0 ANSI: 4
>sd 3:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB)
>sd 3:0:0:0: [sda] Test WP failed, assume Write Enabled
>sd 3:0:0:0: [sda] Assuming drive cache: write through
>sd 3:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB)
>sd 3:0:0:0: [sda] Test WP failed, assume Write Enabled
>sd 3:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 3:0:0:0: [sda] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg0 type 0
>usb-storage: device scan complete
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>usb 1-2: USB disconnect, address 10
>usb 1-2: new full speed USB device using uhci_hcd and address 11
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=0421, idProduct=043d
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: Nokia 6270
>usb 1-2: Manufacturer: Nokia
>usb 1-2: USB disconnect, address 11
>usbcore: registered new interface driver cdc_acm
>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: registered new interface driver cdc_ether
>usbcore: registered new interface driver rndis_host
>usbcore: registered new interface driver rndis_wlan
>usb 1-2: new full speed USB device using uhci_hcd and address 12
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: new full speed USB device using uhci_hcd and address 13
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: new full speed USB device using uhci_hcd and address 14
>usb 1-2: device not accepting address 14, error -71
>usb 1-2: new full speed USB device using uhci_hcd and address 15
>usb 1-2: device not accepting address 15, error -71
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb 1-2: new full speed USB device using uhci_hcd and address 16
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: new full speed USB device using uhci_hcd and address 17
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: new full speed USB device using uhci_hcd and address 18
>usb 1-2: device not accepting address 18, error -71
>usb 1-2: new full speed USB device using uhci_hcd and address 19
>usb 1-2: device not accepting address 19, error -71
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb 1-2: new full speed USB device using uhci_hcd and address 20
>usb 1-2: configuration #1 chosen from 1 choice
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb 1-2: New USB device found, idVendor=0421, idProduct=043e
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: Nokia 6270
>usb 1-2: Manufacturer: Nokia
>usb 1-2: SerialNumber: 357576002050589
>usb-storage: device found at 20
>usb-storage: waiting for device to settle before scanning
>scsi 4:0:0:0: Direct-Access     Nokia    Nokia 6270       0000 PQ: 0 ANSI: 4
>sd 4:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB)
>sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled
>sd 4:0:0:0: [sda] Assuming drive cache: write through
>sd 4:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB)
>sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled
>sd 4:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 4:0:0:0: [sda] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg0 type 0
>usb-storage: device scan complete
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

Actions: View

Attachments on bug 18044: 3103 | 3104 | 3105 | 3106